Direct Georeferencing using a GNSS/INS:What is it?
July 31, 2012 7 Comments
Article1: Video Transcript- Direct Georeferencing using a GNSS-Inertial Navigation System (INS): What is it?
Direct georeferencing is when you can assign a geographical location on Earth to a pixel from a camera image or a digital point from a laser WITHOUT any additional measurements referencing the ground.
To make this really simple, you can take a digital picture of a scene, and because you know the position of the image and its pointing direction relative to the ground, for every object you see in the picture, you can measure its location on Earth.
So I don’t have to send someone out into the unknown to figure out where it is. I can get it from my photos.
This concept was revolutionary for the aerial mapping industry because maps that used to take months to make could suddenly be created within days.
That’s because we could eliminate the need to send out people into the field to gather ground points, which took months. Then we eliminated or enhanced aerial triangulation method, which used to take weeks.
Now, Direct Georeferencing allows us to make high-accuracy maps within hours and for certain applications, we already have real-time, on-board processing where maps are being made while the plane is still flying.
The most common way to do direct georeferencing in airborne, land, and marine mapping is with an integrated GNSS Inertial Navigation System.
The question is how does this work?
Very simply, using the example of an aerial camera, you need to know four things:
Number ONE: You need the geographical location of the camera. For this you have, GNSS, which stands for Global Navigation Satellite System, and GPS is an example of one. You probably use the GPS device in your smart phone and tablets and even the navigator in your car. GPS gives you the geographical latitude, longitude, and even elevation of your camera relative to the earth. These are geographic coordinates, which represents an ellipsoidal or rounded earth.
Number TWO: The Inertial navigation system or (INS) gives you the pointing direction or orientation of your camera w.r.t. the ground. This means, I know my roll, pitch, AND my direction w.r.t. to North Pole. This system is based on an Inertial Measurement Unit and it is usually sitting on your sensor.
Number THREE: You make a map projection where you convert your sensor’s geographical coordinates and orientation for each picture to a cartesian coordinate system. You want to represent a three-dimensional body, like the earth onto a plane, like a piece of paper. This means, you’re taking a rounded object, and flattening it out. So why would you do this? Very simply, when this is flattened, you can measure distances, areas, shape, direction, bearing, and scale. Adding the elevation component lets you measure heights, volumes, and slopes. This opens many possibilities.
Number FOUR: People forget this one! You HAVE to know the inside geometry of the camera or sensor. This means, you know the CCD of the camera so well, that you can create an internal coordinate system for every single pixel in it. AND, this means your equipment is engineered so well that the parts are stable to a 1000th of a degree and by a pixel size, which can be about five microns.
So Direct Georeferencing is serious precision and engineering!
Now, these concepts can be applied, not just for airborne, but for land, mobile, indoor, and marine mapping applications.
This is GeoErnest.